Dated reference quote · October 1, 2026
Electronics tray reference quote
A dated PETG quote for an original open electronics-tray sample. Review the downloadable geometry, selected settings and small-run quantity prices.
These estimates apply to this exact model and the settings below. They are a snapshot of production quoting on the stated date; current pricing and your design may differ.
Quantities 1 / 5 / 25
Part subtotals and separate shipping
| Quantity | Per part | Part subtotal | Shipping estimate | Production estimate |
|---|---|---|---|---|
| 1 | $11.55 | $11.55 | At checkout | 2 days |
| 5 | $4.74 | $23.70 | At checkout | 2 days |
| 25 | $3.38 | $84.49 | At checkout | 2 days |
Dated model-based part subtotals for the stated material and settings. Each original model was sliced once; quantity time and material totals scale that single-model slice, with the current site's plate/job and shared-setup pricing assumptions. The complete batches were not separately sliced or physically timed. Production days are estimates based on the queue snapshot on 2026-10-01, not an arrival promise. These are estimates, not fixed offers. Displayed unit prices and authoritative subtotals are rounded independently; multiplying a displayed unit price can differ by a few cents. CAD work and separately requested hardware or finishing are excluded.
Shipping is excluded from these part subtotals and calculated for your U.S. destination at checkout. Carrier transit is additional to the dated production estimate; faster shipping does not shorten production.
The per-part display is rounded to cents; the independently calculated part subtotal is authoritative. Production estimates exclude shipping transit and are not guaranteed delivery dates.
Reproducible model and settings
What was quoted
An original open 70 × 45 × 18 mm tray with 3 mm side walls, a 2.4 mm floor and four cylindrical mounting bosses with 2.4 mm holes. It demonstrates enclosure geometry; it is not an electrical or environmental protection rating.
- Material
- PETG
- Overall dimensions
- 70 × 45 × 18 mm
- Layer height
- 0.24 mm
- Infill
- 15%
- Wall count
- 2
- Orientation
- Automatic orientation selected by the production OrcaSlicer profile (auto mode).
- Supports
- Automatic supports enabled through the production shop profile (auto mode); support geometry depends on the slice.
| Quantity | Print time | Filament use |
|---|---|---|
| 1 | 0.673 hours | 20.815 g |
| 5 | 3.365 hours | 104.075 g |
| 25 | 16.825 hours | 520.375 g |
Download the exact shop-owned STL →
Model SHA-256: a223664837ffeaa3b44782d31f2d3232dae0151ee8381c3ee62e15ccb9626266
This is a reference geometry provided by BuildplateCo for price comparison and experimentation. Confirm design suitability before using a printed part in your application.
Get current pricing for your geometry
Upload a print-ready STL or STEP and compare materials and quantities. For fit, material or design questions, include mating dimensions and the intended use in a review request.